How to connect xbox 360 memory unit to pc

how to connect xbox 360 memory unit to pc

Can you connect the xbox 360 and your computer through a USB cable?

How To:Install XBox memory unit drivers on your PC. Install XBox memory unit drivers on your PC. The XBox memory units were never very popular and have become even less so since Microsoft enabled the use of flashdrives with the XBox in the last firmware update. If you haven't updated your firmware or still want to make use of your memory units for modding, this video will teach you . XBox Memory Unit USB Connector Step 1: Open the Unit. As the manufacturer of your device doesn't want you to open it, the MU is melt/glued so you Step 2: Solder USB Connector to PCB. Now you need your USB connector. Prepare it by stripping the cables inside and Step 3: Add the Voltage.

There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download what is a 4gb memory data on this help page. I havent baught the xbox yet but i am gettin the arcade edition so i wanted to know, if I can connect the xbox to my computer using the USB cable and use th computer hard drive to save the game data.

If that is possible, than does the cabe come with xbox or we have to buy it separately? The you can only save game data to an Xbox hard drive or memory unit. The Xbox Arcade comes with a MB memory unit which you can use to save games. There are some third party USB cables which are supposed to let you connect a Xbox hard drive to your computer and let you copy files back and forth but this is borderline hacking and could get you into trouble.

Microsoft has been cracking down on people who use tampered save games and such and accessing files through your computer might be considering tampering. NOOOO as TeknoKid said u could only save data on the Xbox hardrive or the memory unit so i just suggest that u buy a hardrive as an accesori when u buy ur arcade but its gonna cost u a bit more all together but it is a good deal since the hardrive gigs and the 1 u what is subordinate clause examples get with The Pro Bundle is 20 gigs.

It doesn't work good that way, the best thing to do is to connect your media player like an ipod via usb to the xbox and put your songs on that way, thats the way i do it and it works a lot better or to do individual cds.

Unless if you buy Datel's Xport for your Xbox This little piece of mechinary lets you transfer your Xbox game saves to anywhere on your computer. You'll know ALOT more if you click on this link.

Trending News. Homebuyers are 'depressed for good reason': Corcoran. Yankees fans pelt field with baseballs, halt game. Top NFL prospect clears up comments about motivation. Experts explain. Kate Middleton pays stylish tribute to queen, Diana. Spring game draws largest sports crowd in pandemic. Queen Elizabeth's loving gesture to her late husband.

Terry Crews describes how therapy saved his marriage. Why police can stop drivers with air fresheners. Everything worth buying during Amazon's major sale. Answer Save. TeknoKid Lv 6. Favorite Answer.

Good luck. Your Choice Good Luck. Nickname Lv 4. How do you think about the answers? You can sign in to vote the answer. Still have questions? Get your answers by asking now.

What format does Xbox 360 use for USB?

Nov 27,  · The Xbox Arcade comes with a MB memory unit which you can use to save games.. you can connect other USB based storage devices (flash drives, hard drives, iPods) to the Xbox but you cannot save to those devices.. you can only use the Xbox to play the media files (video, music and pictures) on the devices. May 31,  · Thank you guys for all your support. Make sure to subscribe our channel and hit the like button hope to see new vids on xbox 2k18, text me for solving any is. Dec 01,  · Plug Memory unit into adapter, plug adapter into USB port on , and recognizes the memory unit no problem. The Geometry Wars game that came on the memory unit plays perfectly. I have not tried to software included for the PC, as I already have an Xport and the software also works with this cable just nicefreedatingall.coms:

You should have some experience in soldering and you need some piece of wire, a USB connector of your choice, a 3. By forcing Windows Vista to use some default drivers, you can access the unit's memory like a USB memory stick.

You just need a software tool to read out the XTAF -file system of the unit. Pay attention to the parts inside! They are very sensitive and near the borders of the circuit board. Now you need your USB connector. Prepare it by stripping the cables inside and cutting off the cable shield. Add solder to the ends of the four wires and cut them a bit so you can precisely solder them to the PCB.

The last pin is shield again as you can see. Note: Think forward and carefully adjust the cable length to your USB port to fit the case length and inner height! The parts have nearly no space to the top I needed to modify the case. Now we insert the 3. You can get this little thing from your local electronics shop or over the Internet which might be waste of money as this part shouldn't cost you more than one buck.

It is highly recommended to use a SMD surface mounted device part, as there is rarely any space in this freaky small piece of plastic Your part might look exactly the same as mine but you really need to check the pinout using a datasheet you get from your part vendor! Note: You do not need to connect the tab of the regulator, it won't warm up seriously and you don't have to glue the part as the case will gently press it down.

Now that you have your parts inside, you can put the case back together. You might need to apply some modifications to one or both of the case halfs as you have added the new parts. I had to remove some area of the bottom half for the connector. Finally tape the thing so it won't fall into parts again I used normal transparent tape. You can also glue it but you should take into account that you will void the possibility of servicing the unit again and that you might damage the PCB with the glue.

This tutorial ends here. Have fun and enjoy accessing the holy world of xbox's XTAF file system. I think I will make another instructable about using the unit with a PC drivers, tools and stuff. Remember: This will void your guarantee, but it will guarantee you much interesting insight in your game console system and enables you to share savegames and stuff ;.

Now that is pretty interesting. I've heard of people doing this before and have always been curious about doing it myself. Looks like I can now. Exactly how did you connect the wires to the pins? Did you just put the wire inside the color wire of the usb cord under them? If you don't want to use a regulator, but you feel safe modding your pc, YOu can Make a seperate usb Port that runs 3.

Reply 11 years ago on Introduction. Possiblie reasons: 1 You disconnected or destroyed some pin of the socket going into the box. A PC will still show up the hub and the memory but the box also needs the security method device to check if it is an original unit or just a faked usb device that it would ignore. What exactly have you done? Did you try to format the unit with windows FAT or similar? Are you sure you have changed somethin? Could it still be the security method chip that is dead-soldered?

Is the connector fine? If you are sure its the file system or nothin of the above can solve: Can you format you unit in the xbox if yes do so or doesn't it even show up in the System menu? Hey i too got it working.

Just trying to see how to set up the default USB drivers as you said to make it come up as a drive to be able to use Xplorer If I remember it right, the easiest way is to use default class-compilant USB drivers by manually installing them. The device that shows up at first is a simple HUB that you can use if you manually set the default USB hub driver for it. After that you get access to the subdevices - a security thing and the memory itself. You can install a default USB-storage driver like a "usb-stick" and the raw memory unit will show up as a drive.

Reply 12 years ago on Introduction. Ahah, as stupid as I am I have let a drop of solder drop on my mc Ah im done and it work fine, without the regulator, lol thanks for the instructable, sorry for the spam! I connect the red wire from usb to where he got to blue wired on the pic.

It read on my pc but wont work on my How long have you been using it like that? Will it work for extended periods of time? I really don't want to add a 3. Tanks for your feedback! I am not the total "trial 'n' error-guy" but perhaps this might work as well As the controller IC is from Microsoft you will hardly get a datasheet telling you it this thing is 5V compatible.

If you say it woks the thing seems to accept it, but it might overheat and self-burn itself if it is not - so be careful! Perhaps others can proof this is possible The usb worked fine and I dropped some save in it. Btw, I had a hard time getting solder to stay on my iron, do you know why? Did you make this project? Share it with us! I Made It! Reply Upvote. Pafo 11 years ago on Introduction.

SharkyTheWhite testfriend Reply 11 years ago on Introduction. SharkyTheWhite blzzrd Reply 11 years ago on Introduction.

4 thoughts on “How to connect xbox 360 memory unit to pc

Add a comment

Your email will not be published. Required fields are marked *