How to tie a bow on your moccasins

how to tie a bow on your moccasins

How To Tie Moccasins

Oct 13,  · I show you how to tie a moccasin the right way. I show you how to tie a moccasin the right way. How to Tie Your Moccasin Perfectly: Now take the one strand that you see in step 6 and tuck it under the loop you just made the picture will help you understand what I am saying even better.

Please note, comments must be approved before they are published. Traditional moccasins are extremely comfortable and stylish to wear. However due to the fact that the laces are made of leather, many people have a hard time tying how to dress for a sadie hawkins dance together in a way that looks good and stays secure.

It can be frustrating to have to constantly tie your leather moccasins up, when one of the reasons you likely enjoy wearing them is because they are slip on shoes. It can also be a hassle to constantly have to retie your child's moccasins if they are constantly coming undone with all the wear and tear kids do, running and crawling around.

The good news is there are 3 different ways you can try tying your moccasin laces that are less likely for them to come undone.

Double Slip Knot or Seaman's Knot One way is tying a double slip knot which is also known as a seaman's knot. It involves tying a starting knot, then forming 2 "bunny ears" with the laces, next folding and threading the left loop through the centre hole, and finally folding the right loop over the back and through that same centre hole formed.

You can pull both loops to tighten if necessary. Comments 1 i liked the last video that showed the way to tie a moccasin.

Boat Shoe Knot

Jun 26,  · Suggestion added from viewer - *When you put the lace through Long loop for he last step, make sure you're still holding that long loop to tighten it*Please. How To Tie Moccasins Two Loop Knot. Set the laces apart to prepare for tying. Tie a securing knot with the smooth sides of the leather Double Slip Knot. Set the laces apart to prepare for tying. Tie a securing knot, want to have the smooth side of the Bowknot. Set the laces apart to prepare. Feb 11,  · y'all. I made this video in high school, on my phone with no mount to hold it. You should really relax in my comments.. They're just shoe laces. I learned fr.

This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. This article has been viewed , times.

Learn more Moccasins can be extremely comfortable, but since the laces are made of leather, many people have a hard time tying them together in a way that looks good and stays secure.

There are a few different methods you can try the next time you need to tie a pair of moccasins. To tie moccasins using a boat shoe knot, form a loop with the right lace and wrap the end around the loop in a tight coil. Next, coil the remaining loose end of the lace around the loop in the same direction several times. Continue wrapping the lace around the loop until you reach the top of the loop.

Then, feed the end of the lace through the top of the loop and tug upward on the coil to pinch the loop closed. Finally, use the same technique on the left lace to create a separate coil. For tips on using other tying techniques, read on! Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue.

No account yet? Create an account. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy.

Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Related Articles. Article Summary. Method 1 of Tie a starting knot. To start, cross the left lace over the right lace. Wrap this left lace around the right lace and pull tight to complete a basic starting knot. Form two "bunny ears" with the laces. Bend the left lace in half, forming a loop, and pinch the bottom of the loop together with your fingers.

Repeat the same thing with the right lace and hold that loop secure with your other hand. Hold the two loops side by side for the moment.

Quickly gauge the approximate size of each loop. Fold and thread the left loop. Fold the left loop over and around the right loop, and then gently pull it through the hole that forms between the two loops. Do not tighten yet. Fold the right loop over the back. Bend the right loop forward so that it crosses under the left loop and the entire knot structure. Feed this loop through the same middle hole that you just fed the left loop through. This can be done simultaneously with or immediately after taking care of the left loop.

Note, however, that the left loop will need to be folded over before you begin working with this right loop. Otherwise, the middle hole you need to push the right loop through will not be created yet. After pulling the right loop through the center hole, the two lace loops should be about the same size again. Pull the right loop to the right and the left loop to the left to tighten the knot. Use even pressure on both laces to form an even, tidy bow.

As long as you apply enough pressure and tighten the knots thoroughly, they should not come undone, even with slippery leather laces. You might have to push the knot together a little as you tighten it. Method 2 of Form a loop with the right lace. Bend the lace into a loop near the base of the shoe and pinch the bottom closed with your fingers.

Your loop should use up about one half to one third of the lace, and the rest of the lace should dangle to the side. Note that this method does not begin with the usual starting knot. In fact, in this method, the two laces are not tied together and the ends are not secured. Essentially, this is a decorative technique used to take care of the laces in a manner that keeps them from getting in the way as you walk.

The coils formed by this knot method will stay firmly in place if secured well, but they will not secure the shoe to your foot like other knots will. Make sure that your moccasins are tight enough to be worn as slip-on shoes when using this lace tying method. Wrap the end of the lace around the loop. Starting with the portion of the hanging end that is closest to the base of the loop, create a tight coil around the entire loop. You can wrap your coil in whichever direction you please.

Make this coil as tight as possible without disrupting your grip. Wrap the rest of the lace around the loop. Coil the remaining loose end of the lace around the loop by wrapping it in the same direction several times. Each coil should be directly on top of the last one. Continue wrapping the lace end around the loop in this manner until you reach the top of the loop and have only a short tail left. Make sure that each coil or wrap is immediately above the one before it. Otherwise, the overall coil you end up with may not be secure enough to hold together.

Wrap the laces around as tightly as possible without losing your grip. You should be left with a very tight coil of leather lace when done. Feed the end of the lace through the top of the loop. Take the remaining shoelace end and feed it through the small remaining gap at the top of the loop. Then tug upward on the on the coil to pinch the top of the loop closed. The tighter you tug on the coil, the more secure your coil will be. If you tug the lace tightly enough, it should not unwind very easily.

Repeat with the left lace. Use the same technique on the left lace to create another, separate coil. Try to make your left loop the same size as your right loop for a symmetrical look.

Method 3 of Cross the left lace over the right lace. Pull the two laces together firmly to secure this knot in place. This starting knot forms the basis for many different lace tying techniques. Pull about 2 to 3 inches 5 to 7. Do not cross the ends over each other. Instead, simply pinch the loop closed toward the bottom with your fingers. Note that if you are left-handed, you might find it easier to start with the left loop instead of the right.

Wrap the left lace around. Pass the left lace over the right, wrapping it snugly around the back of the right loop. Use your index finger to push the left lace through the center hole created in between the two laces. As you push the lace through, you should notice a second loop forming from the left lace. You should continue to hold the right lace loop in place as you work with the left lace. Pull both loops together to tighten.

Grab both loops with your fingers and pull them outward to tighten the knot securely. The left lace loop will be pulled to the right and the right lace loop will be pulled to the left.

This knot is the standard knot used to tie most shoelaces. You can use it to tie your moccasins, and if you practice enough to create an even, smooth looking loop, the appearance can be quite flattering.

Since it is not as secure as the double slip knot or boat shoe knot, however, you might find yourself re-tying your moccasins more often if you stick with this method. Include your email address to get a message when this question is answered. To keep your knot in place, you can apply a small drop of superglue beneath the bow. Helpful 0 Not Helpful 1.

1 thoughts on “How to tie a bow on your moccasins

Add a comment

Your email will not be published. Required fields are marked *