What to do if cell phone gets wet

what to do if cell phone gets wet

Your smartphone got wet. Here's what not to do first

Aug 29, What kills a wet phone is electricity, said Gary Tan with DE iPhone repair, a San Francisco-based company that offers multiple sites for smart phone repair and drying. Do not charge it. Do not Author: Elizabeth Weise. Nov 14, Gently pat the phone with a towel, then place the phone on paper towels. Place the phone somewhere where it won't be disturbed. If possible, place the phone and paper towels in a container with Damp Rid or silica gel packets. Don't use loose powder; loose powder leaves particles on .

Last Updated: How to know when to replace a hot water heater 27, References Approved. This article was co-authored by Josef Storzi. Josef specializes in repairing screens, charging ports, batteries, water damage, speakers, and microphones on all mobile phone brands including Apple, Samsung, LG, Nokia, and Sony.

He also specializes in tablet, laptop, and computer repairs as well as the pros and cons of recent mobile software updates. There are 23 references cited in this article, which can be found at the bottom of the page. This article has been viewed 9, times. Even if you dropped it into the sink, toilet, or bathtub, you may be able to save it.

The most important thing you can do is act fast. Take what does the word shilling mean out of the water as soon as possible.

Then turn it off, take out the battery, and remove all accessories. Try to remove as much water from it as you can with towels and a vacuum cleaner. Then, put it in a bowl of instant rice or other absorbent material for hours before turning it on. With a little luck and fast action, your cellphone may survive its brush with death.

If you got your cell phone wet, the first thing you should how to delete exe. file is turn it off, even if it seems to be working, so it doesn't short circuit.

Once it's off, take out the battery and place it on a paper towel. Depending on your phone, you might need to use a special kind of screwdriver to get the battery out. You should also take out your phone's SIM card if it has one. When you've finished disassembling your phone, use the hose attachment on a vacuum to suck water out of all the components.

Wipe your phone and battery dry with a paper towel as you're vacuuming it. Once you're done, leave your phone and battery in a bowl of uncooked instant rice or silica gel packets for hours to absorb any leftover moisture.

To learn how to dry a wet cell phone using crystal cat litter, scroll down. Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue.

No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Things You'll Need.

Related Articles. Article Summary. Method 1 of All rights reserved. This image may not be used by other entities without the express written consent of wikiHow, Inc.

If your phone has been submerged for a long period of time, you may not be able to resuscitate it. Disconnect the power if your phone is plugged in and in water. If your phone is plugged into a wall charger and submerged in water, turn off power to the outlet before attempting to remove it from the water.

Turn your phone off immediately, even if it seems to be working. Leaving it on can cause it to short circuit. Rinse off the impurities if any, like sea water, mud, etc. After removing the phone from the water, quickly gather some paper towels or soft cloths.

Lay your phone on top of them while you remove the battery cover and battery. You will need a Philips screwdriver to open most phones. This is one of the most important steps to saving your phone. To find out if the phone is truly water damaged, check the water damage indicator. In most cases, the indicator is located in the battery compartment behind the battery, or on the battery itself, depending on the phone model. Normally, it will look like a white square or circle.

If this is pink or red, your phone has water damage. Sometimes the water is behind it and the water damage indicators. Note: even if the cover isn't on, the phone can work when plugged in. Take out the SIM card if your phone has one.

After removing the SIM card, pat it down with a dry paper towel or cloth. Set it on a dry cloth or paper towel to dry out until you reconnect your phone to your cell network. If your phone does not have a SIM card, you can skip what do you think is beautiful step. These cards tend to not get water damage and can be kept for recovery. In many cases, this may be more valuable and worthy of saving than the phone itself.

Detach any accessories that may be on your phone. Remove any protective covers, ear buds, memory cards, or other things that attach to your phone. Method 2 of Put your phone in a bowl of uncooked instant rice for hours. Pour 4 cups g of rice into a large bowl. Then bury your phone and its disconnected battery in the rice.

The rice will help draw out any residual moisture in your device. This will allow any water left inside to run down and hopefully find an opening to escape through. Use silica gel packets instead of instant rice if you have some. Place the silica gel packet syour phone, and the disconnected battery into a container. Then let the phone sit for hours to give the gel time to absorb any moisture remaining in your phone.

Speed is the most important element in saving your wet phone, so use rice or another desiccant if you don't have any silica packets lying around. Simply place them in the container with your phone. Cover your phone with 4 cups about. Then, lay your open phone and its detached battery on top of this layer. Pour in the rest of the litter to fully cover your phone.

Only crystal cat litter, which is made of silica gel, will work. Other desiccants, like couscous pearls and instant oatmeal, will also work just as well.

Suck the water out of your phone with a vacuum cleaner. Fit a hose attachment onto your vacuum cleaner. This is the fastest method and can completely dry out your phone and get it working in 30 minutes. You could also try sucking out the water with your mouth. This is very gentle and allows you to be close enough to your phone to hear where the water is. Listen for trapped water while doing this to focus on water-logged areas. Continue to remove water there until the 'trapped water sound' is all gone would sound like what parts of the body does alcohol effect air flow then.

Use an air compressor to blow water out of your phone. Set your air compressor to a low psi pounds per square inch setting. Then, blow the air across the surface of your phone and its ports. Using a higher psi may damage the inner components of your phone.

The warm air may damage components in your phone. Wipe your phone and battery dry with a soft rag or towel. Leave your phone in open air with a fan as another option. Place your phone on top of a dry towel or other absorbent surface. Wait hours, then turn on your phone. Wipe away or vacuum any dust and dirt from the device and the detached battery.

Then, insert the battery into the phone and try to power it on. Turn on the phone and see if it what do they call a quarter pounder in europe.

What not to do after you see your dropped phone in water

Mar 30, You can safely apply alcohol on the phone because its not water; it even absorbs it. Clean out the phone with alcohol for about 5 minutes. After . Apr 26, We first have to try to get rid of all the excess water found in the exterior of your phone. Use the paper towel to dry out every component. Just .

When your phone does a Tom Daley and somersaults into the bath, you'll need a solution, fast. Keep these tips in mind for when it happens. Washing machines, toilets, cups of tea, the British weather That is, until they fill the lungs of our cherished mobile phone, leaving us weeping over a soggy, lifeless metal carcass. Dropped your handset in the bath? Fumbled your phone and plopped it in the loo? Don't panic -- just follow these steps and you'll have a good chance of breathing life back into your drowned smart phone.

And check out the 'What not to do' section for some useful mythbusting. While dismantling your phone completely would help it to dry out more effectively, doing so will void your warranty.

It usually requires specialist tools and may jeopardise your phone if you're not careful, so I don't recommend it. Instead, follow these steps:. Firstly, retrieve your handset from the drink straight away. A prolonged plunge will increase the risk of damage. Resist the urge to check if it still works or press any buttons, since putting pressure on the keys could shift liquid further into the device. In all cases, the best thing to do is immediately pull out the battery, thus minimising power to the device that may cause it to short circuit.

If you own a handset with a non-replaceable battery, like an iPhone or Nokia Lumia , then pulling the battery isn't an option. You'll have to risk pressing a few buttons to check if it's still on and to swiftly turn it off if it is.

Take care when handling the phone in this case. Extract the SIM card and any SD cards it carries, leaving ports or covers on your handset open to aid ventilation. Dry off everything with a towel, including the exterior of your handset, being careful not to let any water drain into openings on the phone. Even when everything's dry, it's very likely there's latent moisture within the device that you'll want to get out before turning it on. The most oft-reported fix for a sodden phone is to bury the handset in a bowl of dry rice.

Desiccant materials, such as rice, have hygroscopic properties that can attract and absorb moisture. You can also use silica gel packs -- the kind used in shoeboxes -- to greater effect. If you don't have any lying around, uncooked rice will do nicely. Place your phone in an airtight container and completely cover it with your choice of desiccant. Leave the container for hours for the material to draw all the moisture out of your handset. If you feel like splashing out, you can buy silica-lined, hermetically-sealed pouches that are specifically designed for the task.

When you're confident it's dried out, replace the battery and try switching it on. Good luck! A purported fast-track method of drying out a wet phone is to use a hairdryer, or applying heat to the device in other ways. While this would successfully evaporate all the moisture still sitting within the handset, it risks becoming too hot and causing damage to the components. In cases of severe waterlogging, the steam created may not be able to fully ventilate and would simply condense again elsewhere in the phone.

You may get away with it, but it seems rather perilous, so my recommendation is to avoid this method. Another recurring recommendation is to stick your phone in a freezer, wrapped in paper towel to prevent frost damage.

Supposedly, the reduced conductivity of water when close to freezing temperatures will stop your phone from short circuiting when in use.

This is definitely not a long-term solution, however, since as soon as the ice begins to thaw, you're left with the same, if not exacerbated, problem. In the process you'll probably mess up your phone's very fragile screen, which hardly seems worth risking for a short-term fix of dubious effectiveness.

For less severe dunkings, you may get away with drying your phone thoroughly on the exterior alone, paying special attention to openings like the headphone jack and USB port. To this end, a few have suggested gently poking into them with a toothpick wrapped in paper towel. While jabbing into your phone with a stick is always a bit iffy, the biggest risk is that rags of sodden paper will get stuck inside your phone and play havoc with its innards.

One suggestion is to overcharge the handset so that the build-up of heat is gradual and not excessive, but this carries all the risks you'd expect with running a current through wet circuitry.

Inevitably, someone reading this will wonder if it's possible to dry out a phone by putting it in the microwave. Please see this for an adept response. If you succeed in reviving your phone, then congratulations, but you may not have yet won the war with the Grim Reaper of gadgetry. The metal within your phone coming into contact with water and oxygen may create rust that will corrode over time. While a professional phone fixer may be able to clear out any corrosion by swabbing the circuitry with rubbing alcohol -- again, don't try this at home, kids -- in many cases, the eventual demise of your phone is only a matter of time.

Seek out the liquid contact indicator LCI. It's a small white sticker that turns red when it comes into contact with water.

Manufacturers place LCIs on their products to use as a litmus test when deciding warranty claims. In most cases, they can refuse to fix or replace your handset if the LCI has been triggered. Their location varies from phone to phone, and increasingly manufacturers have taken to hiding them out of reach of Tipp-Ex-wielding customers. Irrespective of the LCI's state, you should contact the manufacturer to see if they can help.

That's a long-term solution, but if you need a phone or the data it holds right away, you'll need to dry out your phone before you try to use it, as outlined above. Let me know if you have any other tips for waterlogged blowers in the comments below, or over on our super-helpful Facebook page. Be respectful, keep it civil and stay on topic. We delete comments that violate our policy , which we encourage you to read. Discussion threads can be closed at any time at our discretion.

Jake Paul vs. How to save a wet mobile phone - and what not to do When your phone does a Tom Daley and somersaults into the bath, you'll need a solution, fast. Mat Greenfield. What to do While dismantling your phone completely would help it to dry out more effectively, doing so will void your warranty. Instead, follow these steps: 1.

Remove any peripherals and attachments on your phone, such as cases. What not to do A purported fast-track method of drying out a wet phone is to use a hairdryer, or applying heat to the device in other ways. Beware corrosion If you succeed in reviving your phone, then congratulations, but you may not have yet won the war with the Grim Reaper of gadgetry. Is your warranty still valid? Discuss: How to save a wet mobile phone - and what not to do.

2 thoughts on “What to do if cell phone gets wet

Add a comment

Your email will not be published. Required fields are marked *